UPower-Hi Series Inverter/Charger
The UPower-Hi Series Inverter/Charger is a versatile and powerful device that can be used in a variety of solar and off-grid applications. It features a wide input voltage range, making it compatible with a variety of solar panels, and can charge both lead-acid and lithium batteries. The UPower-Hi Series also offers a variety of operating modes, allowing you to customize the system to meet your specific needs.
Here are some of the key features of the UPower-Hi Series Inverter/Charger:
- Wide input voltage range: 12-60V DC
- Compatible with lead-acid and lithium batteries
- Multiple operating modes: solar, utility, generator, and inverter
- Pure sine wave output
- Built-in MPPT controller
- Automatic battery balancing
- Remote monitoring and control
- Epever UP2000-HM6022 Hi-Series-Inverter-Charger
- Epever UP3000-HM10022 Hi-Series-Inverter-Charger
- Epever UP5000-HM8042 Hi-Series-Inverter-Charger
Save time and money with the UPower-Hi Series Inverter/Charger! This device is designed to provide dependable power at an affordable price. With its high performance and advanced features, you can rest assured that you’ll never be without power when you need it most.
Features
- Supports the battery mode or non-battery mode
- Surge current and reverse connection protections to support the lithium battery system perfectly
- Three charging modes: Solar only, Solar priority, Utility & So
- Two AC output modes: Utility priority and Inverter priority
- High tracking efficiency of MPPT no less than 99.5%
- PFC technology which achieves a high power factor of AC to DC charging and reduces the usage of power grid capacity
- Advanced SPWM technology and pure sine wave output
- Configurable battery charging current and discharging current
- Configurable grid charging current
- Self-learning SOC function
- 4.2 inch LCD to monitor and modify system parameters
- Optional WiFi or GPRS Remote control via the RS485 isolated communication port
- BMS-Link port and optional BMS-Link communication protocol module
Technical Specification
Model UP2000-HM6022 Rated battery voltage 24VDC Battery input voltage 60A Continuous output power 2000W Max. surge-power(3S) 4000W Output voltage range 220VAC(-6%~+3%), 230VAC(-10%~+3%) Inverter output Output frequency 50/60±0.2% Output wave Pure Sine Wave Load power factor 0.2-1(Load pow er ≤ Continuous output power) Distortion THD THD≤3%(Resistive load) 80% rated output efficiency 92% Max. Rated output efficiency 91% Max. output efficiency 93% Switch time 10ms(Switch from the utility output to the inverter output), 15ms(Sw itch from the inverter output to the utility output) Utility input voltage 176VAC~264VAC (Default), 90VAC~280VAC(Programmable) Utility input frequency 40~65Hz Max. utility charge current 60A(When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 30A) Max. PV open circuit voltage 450V(At minimum operating environment temperature)395V(At 25℃ environment temperature) MPPT voltage range 80~350V Max. PV input power 2500W Max. PV charging power 1725W Max. PV charging current 60A Equalize charging voltage 29.2V(AGM default) Boost charging voltage 28.8V(AGM default) Float charging voltage 27.6V(AGM default) Low voltage disconnect voltage 21.6V(AGM default) Tracking efficiency ≥99.5% Temp. compensate coefficient -3mV/℃/2V(Default) Surge current 50A Zero load consumption <1.8A Standby current <1.2A Dimension(H x W x D) 607.5×381.6x127mm Mounting size 585*300mm Mounting hole size Φ10mm Net Weight 15kg Enclosure IP30 Relative humidity < 95% (N.C.) Environment temperature -20℃~50℃
Epever UP3000-HM10022UPS system
- Complete intelligent digital energy storage equipment.
- Work continuously at full power for a long time.
- Multiple DC output ports, two 12V2A, two USB 5V3A, one Type C 5V3A, and one 100W Type C interface, (compatible with PD3.0PPS and other protocols).
- Built-in long-life and deep-cycle sealed valve-controlled GEL battery.
- Advanced SPWM technology and pure sine wave output.
- Active PFC is adopted for AC charging, power factor is close to 1, and settable constant voltage current limiting output control.
- Adopt the bidirectional isolation topology.
- Advanced MPPT technology, with an efficiency of no less than 99.5%.
- Bypass automatic switching function, the equipment has complete automatic control and management function.
- Lightning protection circuit for the Utility input terminal.
- AC output electromagnetic compatibility.
- Overload relay at the Utility input terminal to disconnect the inverter/charger when the fault occurs.
- The circuit breaker at the PV input terminal ensures the PV array is safe running.
- The circuit breaker at the Battery output terminal ensures the safe battery running.
- Large lattice LCD screen.
- Remote temperature compensation feature for batteries.
- Optional 4G, WiFi module to remote control the inverter/charger by the RS485 com. port.
- Three-stage charging method.
Model | UP3000-HM10022 | |
Rated battery voltage | 24VDC | |
Battery input voltage | 100A | |
Continuous output power | 3000W | |
Max. surge-power(3S) | 6000W | |
Output voltage range | 220VAC(-6%~+3%), 230VAC(-10%~+3%) | |
Inverter output | ||
Output frequency | 50/60±0.2% | |
Output wave | Pure Sine Wave | |
Load power factor | 0.2-1(Load pow er ≤ Continuous output power) | |
Distortion THD | THD≤3%(Resistive load) | |
80% rated output efficiency | 92% | |
Max. Rated output efficiency | 91% | |
Max. output efficiency | 93% | |
Switch time | 10ms(Switch from the utility output to the inverter output), 15ms(Sw itch from the inverter output to the utility output) | |
Utility input voltage | 176VAC~264VAC (Default), 90VAC~280VAC(Programmable) | |
Utility input frequency | 40~65Hz | |
Max. utility charge current | 80A(When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 40A) | |
Max. PV open circuit voltage | 450V(At minimum operating environment temperature)395V(At 25℃ environment temperature) | |
MPPT voltage range | 80~350V | |
Max. PV input power | 4000W | |
Max. PV charging power | 2875W | |
Max. PV charging current | 100A | |
Equalize charging voltage | 29.2V(AGM default) | |
Boost charging voltage | 28.8V(AGM default) | |
Float charging voltage | 27.6V(AGM default) | |
Low voltage disconnect voltage | 21.6V(AGM default) | |
Tracking efficiency | ≥99.5% | |
Temp. compensate coefficient | -3mV/℃/2V(Default) | |
Surge current | 60A | |
Zero load consumption | <1.8A | |
Standby current | <1.2A | |
Dimension(H x W x D) | 642.5×381.6x149mm | |
Mounting size | 620*300mm | |
Mounting hole size | Φ10mm | |
Net Weight | 19kg | |
Enclosure | IP30 | |
Relative humidity | < 95% (N.C.) | |
Environment temperature | -20℃~50℃ |
Epever UP5000-HM8042UPS system
- Complete intelligent digital energy storage equipment.
- Work continuously at full power for a long time.
- Multiple DC output ports, two 12V2A, two USB 5V3A, one Type C 5V3A, and one 100W Type C interface, (compatible with PD3.0PPS and other protocols).
- Built-in long-life and deep-cycle sealed valve-controlled GEL battery.
- Advanced SPWM technology and pure sine wave output.
- Active PFC is adopted for AC charging, power factor is close to 1, and settable constant voltage current limiting output control.
- Adopt the bidirectional isolation topology.
- Advanced MPPT technology, with an efficiency of no less than 99.5%.
- Bypass automatic switching function, the equipment has complete automatic control and management function.
- Lightning protection circuit for the Utility input terminal.
- AC output electromagnetic compatibility.
- Overload relay at the Utility input terminal to disconnect the inverter/charger when the fault occurs.
- The circuit breaker at the PV input terminal ensures the PV array is safe running.
- The circuit breaker at the Battery output terminal ensures the safe battery running.
- Large lattice LCD screen.
- Remote temperature compensation feature for batteries.
- Optional 4G, WiFi module to remote control the inverter/charger by the RS485 com. port.
- Three-stage charging method.
UP5000-HM8042 Portable Power Station
Model | UP5000-HM8042 | |
Rated battery voltage | 48VDC | |
Battery input voltage | 80A | |
Continuous output power | 5000W | |
Max. surge-power(3S) | 8000W | |
Output voltage range | 220VAC(-6%~+3%), 230VAC(-10%~+3%) | |
Inverter output | ||
Output frequency | 50/60±0.2% | |
Output wave | Pure Sine Wave | |
Load power factor | 0.2-1(Load pow er ≤ Continuous output power) | |
Distortion THD | THD≤3%(Resistive load) | |
80% rated output efficiency | 92% | |
Max. Rated output efficiency | 91% | |
Max. output efficiency | 93% | |
Switch time | 10ms(Switch from the utility output to the inverter output), 15ms(Sw itch from the inverter output to the utility output) | |
Utility input voltage | 176VAC~264VAC (Default), 90VAC~280VAC(Programmable) | |
Utility input frequency | 40~65Hz | |
Max. utility charge current | 60A(When the Utility input voltage is 90VAC~180VAC, the Max. utility charge current is 30A) | |
Max. PV open circuit voltage | 500V(At minimum operating environment temperature) 440V(At 25℃ environment temperature) | |
MPPT voltage range | 120~400V | |
Max. PV input power | 4000W | |
Max. PV charging power | 4000W | |
Max. PV charging current | 80A | |
Equalize charging voltage | 58.4V(AGM default) | |
Boost charging voltage | 57.6V(AGM default) | |
Float charging voltage | 55.2V(AGM default) | |
Low voltage disconnect voltage | 43.2V(AGM default) | |
Tracking efficiency | ≥99.5% | |
Temp. compensate coefficient | -3mV/℃/2V(Default) | |
Surge current | 95A | |
Zero load consumption | <1.2A | |
Standby current | <0.7A | |
Dimension(H x W x D) | 642.5×381.6x149mm | |
Mounting size | 620*300mm | |
Mounting hole size | Φ10mm | |
Net Weight | 19kg | |
Enclosure | IP30 | |
Relative humidity | < 95% (N.C.) | |
Environment temperature | -20℃~50℃ |
The UPower-Hi Series Inverter/Charger is a great choice for anyone looking for a reliable and powerful solar or off-grid power solution. It is perfect for homes, businesses, and RVs.
Here are some of the benefits of using the UPower-Hi Series Inverter/Charger:
- Increased energy efficiency: The MPPT controller helps to maximize the amount of power that is generated by your solar panels.
- Reduced battery wear and tear: The automatic battery balancing feature helps to extend the life of your batteries.
- Increased reliability: The UPower-Hi Series is a well-built and reliable device that can withstand the harshest conditions.
- Peace of mind: With the UPower-Hi Series, you can be confident that you will always have access to power, even when the grid is down.
If you are looking for a reliable and powerful solar or off-grid power solution, the UPower-Hi Series Inverter/Charger is the perfect choice for you.